The method of using ceramic particles in the bathroom is as follows:
Prepare the required ceramic materials, such as ceramic particles or fragments, and ensure that they are clean and dust-free.
Clean and clean the bathroom floor to ensure it is clean, dry, and free of dust or debris.
Pour the ceramic pellets into a suitable container for easy mixing and use. Choose the appropriate number of ceramic particles based on the size and needs of the bathroom floor.
Distribute the ceramic particles evenly on the floor of the bathroom, and then use specialized tools or leveling tools to evenly spread them. Ensure that the ceramic particles are evenly filled and do not create uneven ground.
Use your hands or specialized compaction tools to gently compact the ceramic particles. This helps to improve the stability and compactness of ceramic particles. Ensure that the ceramic particles are tightly filled and not easily loosened.
Check if the filled ground is level and free from any obvious bumps. If necessary, the filling amount of ceramic particles can be increased or decreased according to the actual situation to achieve the desired effect.
Clean the ceramic residue on the bathroom floor, and if necessary, use a vacuum cleaner or mop to clean it, ensuring that the floor is clean and dust-free.
It should be noted that when using ceramic backfill, bricks should be laid on the ground first, and the bathroom should be divided into multiple small squares of about 0.5 square meters. Pour ceramic particles into the small square. If the bathroom is relatively deep (requires backfilling with a thickness exceeding 0.5m), fill half of the ceramic particles first, then lay wire mesh on the bottom layer of ceramic particles, and then fill the top layer of ceramic particles. This can effectively avoid the problem of water accumulation and odor caused by overhead backfilling.