Frac Sand in Hydraulic Fracturing Process

Jun 11, 2025 Leave a message

Frac sand is a high-purity, high-durability quartz sand material that is typically fine-grained and rounded. Frac sand is a pressure-resistant material used primarily in the petroleum and other industrial sectors. This versatile sand material is a key agent in hydraulic fracturing, which is used to extract petroleum fluids such as natural gas liquids and crude oil from bedrock units.

 

What role does sand play in the fracking process?

 

Frac sand is used as a proppant throughout the hydraulic fracturing drilling process. As you might guess, the pump eventually shuts off during the process. The fractures shrink to a certain extent, but due to the large amount of frac sand and grain sand in the well, the fractures cannot be closed permanently.

 

Fracking Proppant

 

The new fractures in the rock particles are propped open by the strong sand grains, which form a pore network that allows fluids to flow freely through the rock into the ground. Frac sand is a key material in the entire process and is also called a proppant because this material can prop the fractures open when the pump is not running.

 

While frac sand is the most common proppant used by most fracking companies, other materials such as aluminum beads, ceramic beads, and sintered bauxite can also be used. Frac sand generally has the highest quality properties and is the preferred choice of most oil companies.

 

Importance of Frac Sand in the Hydraulic Fracturing Process

 

Subsurface materials such as organic shales contain large amounts of natural gas, natural gas liquids, and oil that cannot flow into oil wells on their own. Shales cannot flow freely into oil wells because the rock formation lacks permeability to penetrate into the tiny pore spaces.

 

Hydraulic fracturing addresses the pore restriction problem by creating and generating fractures within the fracturing well. The drilling process includes:

Drilling a well into the rock sediment.

 

Seal the well section that contains the oil.

 

Pump high-pressure water into the fracturing section of the well.

 

Hydraulic Fracturing Production

 

Well water is treated with highly specialized chemicals and thickeners to form a gel in the well. The gel is a key agent that enhances the water to move the frac sand particles into place and allows for efficient pumping. Suppliers place large industrial pumps at the surface to increase the water pressure in the sealed section of the well. Water pressure increases until it reaches the breaking point of the surrounding rock formations.

 

Once the breaking point is reached during drilling, the wellbore wall breaks and water rushes rapidly into the resulting fractures, extending the resources further into the rock deposits. Billions of sand particles are carried deep into the fracturing well due to the sudden rupture and water rush, and thousands of tons of fracturing sand are produced in the well.

 

Advantages of the Hydraulic Fracturing Process

Better gravel packing and placement

Reduce pressure drop, minimizing sedimentation problems

Increase drainage area

Minimize sand production by reducing pressure drop

Increase oil and gas flow from fracturing wells

Connectivity of natural fractures

 

Differences between Fracking and Drilling

 

The main difference between hydraulic fracturing and drilling is the respective processes. Hydraulic fracturing uses fluids to expand shale pores to extract oil and gas, while drilling uses available resources in the reservoir. Below we will go into the specific details of conventional drilling and hydraulic fracturing.

 

Conventional Drilling

 

Oil wells are drilled using traditional methods that have been used for decades. First, a vertical well is drilled to reach the underground oil and gas reservoir. Once the well reaches the target depth in the well, the casing in that area is perforated. The perforation process opens up cracks in the rock formation and surrounding areas. Traditional drilling methods are very limited because they can only obtain oil and gas in the area around the bottom of the well.

 

Hydraulic Fracturing

 

Hydraulic fracturing wells are more versatile and can be drilled vertically or horizontally. The initial process is similar to traditional drilling methods, where perforations are performed after reaching the desired depth. The specific operation is to first pump a high-pressure fluid into the rock formation in the well. The fracturing fluid used contains chemicals, sand, and the main component is water. The liquid solution then expands the perforations, causing the rock to fracture.

 

Finally, the oil and gas are released from the porous rock material. Hydraulic fracturing is versatile because horizontal drilling can be expanded from 100 feet underground to 2,000 feet, thereby capturing more oil and gas.

 

Zhengnai New Material is an industry-leading sand and gravel supplier. Our fracturing sand can be used in any hydraulic fracturing process to easily extract natural gas and oil. Contact our team of experts today to obtain high-quality fracturing sand materials and more services.