Benefits of using proppants in re-fracturing

May 14, 2025 Leave a message

1. Improve well production: In re-fracturing, the use of proppants can significantly increase well production. Proppants are fine solid particles that are injected into the fractures created during the re-fracturing process to keep the fractures open. By filling the fractures, proppants prevent the fractures from closing again, allowing for efficient oil and gas production. This can increase well production and ultimately maximize the economic potential of the well.

 

2. Enhance fracture conductivity: One of the key advantages of using proppants in re-fracturing is improving fracture conductivity. Proppants act as a support system for the fractures, preventing them from collapsing and maintaining a channel for oil and gas to flow. The choice of proppant material is critical in determining the conductivity of the fracture. Different types of proppants, such as sand, resin-coated sand, and ceramic proppants, have different degrees of conductivity. For example, ceramic proppants are known for their high strength and conductivity, making them the first choice for certain re-fracturing schemes.

 

Performance Proppants

 

3. Optimal Proppant Placement: Using proppants in refracturing allows for precise placement of proppants within the fractures, ensuring maximum coverage and contact with the reservoir rock. This is particularly important in unconventional reservoirs, where the formations are complex and require careful engineering techniques to achieve effective stimulation. Proppant placement can be further optimized through the use of advanced technologies such as flow dividers, which help to evenly distribute the proppants within the fractures. By optimizing proppant placement, operators can ensure that all available pore space is fully utilized, thereby increasing well production.

 

4. Long-term Wellbore Integrity: Another advantage of using proppants in refracturing is their ability to provide long-term wellbore integrity. By keeping the fractures open, proppants prevent sand and other formation materials from entering the wellbore, causing damage and reducing production. This is particularly important in refracturing operations, where the wellbore has been previously stimulated. Proppants act as a barrier, preventing the fractures from closing and maintaining wellbore integrity for a longer period of time.

 

5. Proppant Selection: The choice of proppant material is critical to the success of a refracturing operation. Different proppants have different properties and advantages, and selection should be based on specific reservoir characteristics and operational requirements. For example, sandy proppants are cost-effective and widely used in refracturing operations, but may not be suitable for high-pressure and high-temperature reservoirs. On the other hand, ceramic proppants have excellent conductivity and strength, but are more expensive. Operators need to carefully weigh the pros and cons and choose the proppant that best suits their needs and budget.

 

6. Environmental Considerations: While the benefits of using proppants in refracturing are significant, their environmental impact must be considered. The extraction and processing of proppants, especially ceramic proppants, can have environmental impacts such as energy consumption and carbon emissions. However, advances in proppant technology have promoted the development of environmentally friendly alternatives, such as recyclable proppants and bio-based proppants. These options are designed to minimize the environmental footprint while still achieving the desired results.

 

Operators should weigh environmental factors and select proppants that meet their sustainability goals.

 

The use of proppants in re-fracturing has many advantages, including increasing well production, enhancing fracture conductivity, optimizing proppant placement, maintaining long-term well integrity, and providing a variety of proppant options to meet specific reservoir conditions. By carefully selecting and using proppants, operators can maximize the productivity and economic potential of the well while taking environmental considerations into account.